Android VM download address: zh.osdn.net/projects/an… You can also select other versions (32-bit for x 86 and 64-bit for x 86_64).

Creating a VM

After creation, see the following figure:On the newly created VIRTUAL machine [right-click] → [Settings], change [Pointing device] in [System] to [PS/2 mouse], as shown in the picture:In Display, set video memory size to maximum and enable 3D Acceleration.You can set Connection Mode to Bridge Mode in Network. The interface name is for the real host connected to the network, which can be viewed in the network Settings of the host. This operation enables the host to connect to the VM. The vm running is not affected.

You can refer to the differences between the four VM network connection modesQuickly understand the four network connection modes of virtual machines To add a disk to storage:Then start the VIRTUAL machine.

Vm system installation

Select the last option and [Enter] to start installation.Select Create new partition as follows:

【NO】Select [New] at the bottom of the interface.Choose 【 Primary 】Default size, directly [enter] :Select [Bootable] as the boot partition, [Enter], as shown below

Then select “Write”, type “Yes”, “Enter” Then [Quit], return to the installation interface, select the first item sda1, [Enter] The partition format is set to [ext4]. NTFS is officially recommended, but the system fails to start when NTFS is selected in the actual test.【Yes】Start formattingPrompt whether to install GRUB, which is the boot screen when booting the system, select [Yes]Whether to allow reading and writing in directory /system, select Yes. After the installation is complete, you can safely restart the system when prompted. Before rebooting, you can shut down the Android ISO image and check whether it is still connected to the VIRTUAL machine from Settings > Storage in VitualBox. If so, remove it. If the virtual disk is not removed, the ISO file is still loaded and the system installation page is displayed after the restart.

Run Android

On the GRUB boot screen, there are options for debug mode and normal mode. Select the first option to boot Android-x86 7.1-rc2If all is well, you should see the following screen: Optional language [Simplified Chinese]Click “Start”Click “Use New Settings”But at this stage, I metThe network is disconnected.“, can be connected to the network of friends can continue to fill in the information as prompted, fill in can enter the “main interface”; Friends who have the same problem or want to skip the following personal Settings steps can do the following:

Before returningYou can select the start screen of the language(the “Back” button is the “small triangle” at the bottom of the interface), click the top left, top right, bottom right and bottom left of the interface successively (click ABCD in turn), as shown in the figure:It will then prompt you to skip the Settings and select the home screen app, either way. Here is the first Launcher3.The main screen is displayed.