First, the system home page

The home page monitors the connection status of smart terminals, device location, and device alarm information.

Features List:

2. Alarm handling

On the alarm handling page, you can view alarms about abnormal monitoring devices on smart terminals. The alarm status can be processed or unprocessed. Click yellow to change the alarm status.

3. Equipment monitoring and service

1. Overall monitoring within the station

Visually monitor the equipment and environment in the station based on the plan. The environment can monitor temperature and humidity, water flooding, smoke, air conditioner linkage, indoor lighting control, access control, harmful gas monitoring, water pump control, fan control, and video monitoring.

  • Equipment monitoring

  • Video surveillance (cruise control, recording, capturing)

  • Air conditioning unit

  • Water monitoring

2. Wiring diagram monitoring

The connection state of switch and circuit breaker is monitored in real time through the plane wiring diagram. Click the monitoring position to pop up a secondary form, and close the switch and circuit breaker. At the same time, the closing state is dynamically monitored by video.

3. Online monitoring

The device real-time monitoring page allows intelligent terminals to collect data from sensors, monitor data periodically uploaded to the server by power transmission and transformation devices, display real-time monitoring data of the day, fusion images of visible light and infrared array sensors, and diagnose device health status. Remote configuration of intelligent terminals through different user role permission control, so that intelligent terminals have stronger flexibility to meet the requirements of different monitoring devices.

  • Infrared visible light image switching

The infrared visible sensor supports three types: infrared image, visible image, and visible infrared fusion image.

  • Discharge map

The local discharge sensor collects PRPD data signals, and the synchronous phase selection of local discharge signals has a significant influence on THE PRPD spectrum, which has great judgment reliability for the discharge type judgment.

  • Evaluate the current health status of the device

Using the multi-performance monitoring data and the health status analysis model of each equipment, the health status of the equipment is evaluated. Common indicators for describing the health status of power devices include Failure rate and Health Status. When these indicators exceed the defined threshold, an alarm message is sent as a command signal for the maintenance of the device status.

4. Equipment analysis

Degradation analysis through the sensor monitoring data curve and the corresponding algorithm analysis, the equipment at the present stage of the running status.